Downloads

Firmware update applications for FloSeries 2 devices

AgriFlo Series 2 firmware update version 3.22.176

Added decimal point in SDI-12 total output.

FloPro Series 2 firmware update version 3.20.171

Added MACE FloSI support.

FloCom is used to configure and download FloSeries 2 devices.

Use FloCom with your AgriFlo Series 2, FloPro Series 2, HVFlo or FloLog.

Please note: If you have a Series 3 device you will need to download Flocom
Plus.

USERS SHOULD DOWNLOAD,READ AND AGREE TO THE MACE SOFTWARE End User License
Agreement (EULA) PRIOR TO DOWNLOADING FLOCOM

MACE Software End User License Agreement

USERS MUST DOWNLOAD, READ and AGREE TO THE TERMS OF
THIS AGREEMENT PRIOR TO DOWNLOADING FLOCOM

FloCalc version 1.0.0.1.

FloCalc is an optional channel profile module for use
with FloCom.

FloCom configuration utility for Flo Series 2 devices.

Version 2.6.1.9

Fixed problem when editing velocity factors.

FloCom configuration utility for Flo Series 2 devices.

Version 2.6.2.1

Adds support for MACE USB comms leads.

Flo Series 2 simulator version 1.1.0.1.

The Flo Series 2 simulator is an optional module that
allows you to use FloCom without a Flo Series 2 device
connected.

AgriFlo Series 2 / FloPro Series 2 user guide.

Revision 1.0

FloCom configuration help file.

Revision 2.2

HVFlo user guide.

Revision 2.0

EchoCal software is used to configure EchoFlo devices.

USERS SHOULD DOWNLOAD,READ AND AGREE TO THE MACE SOFTWARE End User License
Agreement (EULA) PRIOR TO DOWNLOADING ECHOCAL

EchoFlo Quick Start Guide Version 1.1

This guide provides instructions for the setup of
MACE EchoFlo ultrasonic depth sensors.

EchoCal configuration utility for EchoFlo ultrasonic
depth sensors.

Version 5.18.0

REQUIRED for all EchoFlo sensors with FW Rev. 27.7
firmware.

This firmware update will update any Flo Series 3 device (AgriFlo, FloPro or
HydroMace) to the stated firmware versions.

This firmware update contains:

AgriFlo XCi version   3.00.5
FloPro XCi version    3.00.5
HydroMace XCi version 3.00.5

Doppler card version 1.02.0
SDI-12 Master card version 1.00.5
FloSI card version   1.01.4

MAJOR RELEASE: REQUIRES USE OF FLOCOM+ VERSION 2.00.01

ALSO DOWNLOAD XCi PRODUCT MANUAL Version 3.0

Support for MACE WebComm Card

Support for MACE SDI-12 Master Card

Support for:

Non-resettable "Total" channels
"Flow Rate (using 4-20mA)" channels
"Flow Rate (using lookup table)" channels
"Flow Rate (using SDI-12)" channels

Product specific release notes:

AgriFlo XCi version 3.00.5
Supports all MACE FloSeries3 Cards

FloPro XCi version 3.00.5
Supports all MACE FloSeries3 Cards

HydroMace XCi version 3.00.5
Supports all MACE FloSeries3 Cards except MACE Doppler
Card

READ ME FIRST - Using the Upgrade Application Flo
Series3 to XCi

Instructions on updating the Flo Series3 devices using
the MACE Upgrade Application for Flo Series3 devices.

FloCom Plus is used to configure and download FloSeries 3 devices.

Use FloCom Plus with your AgriFlo Series 3, FloPro Series 3 or Hydromace 3000.

USERS SHOULD DOWNLOAD,READ AND AGREE TO THE MACE SOFTWARE End User License
Agreement (EULA) PRIOR TO DOWNLOADING FLOCOM PLUS

MACE Software End User License Agreement

USERS MUST DOWNLOAD, READ and AGREE TO THE TERMS OF
THIS AGREEMENT PRIOR TO DOWNLOADING FLOCOM PLUS

FloCalc version 1.0.0.1.

FloCalc is an optional channel profile module for use
with FloCom+.

Supports XCi firmware

REQUIRES THE "PATCH TO 2.00.01" TO BE RUN AS
WELL

FloComPlus Patch V2.00.00 to V2.00.01

MUST BE RUN AFTER INSTALLING FLOCOM+ V2.00.00

Driver installation file for MACE USB comms leads.

Flo Series3 - XCi Product Manual Version 3.0

This Manual provides:

This new manual reflects the changes in functionality
for all products with
XCi firmware.

Includes:

Support for SDI-12 Master Card
Support for MACE WebComm Card
Enhanced section on "Interpreting Real-Time
Velocity Graphs"

HydroMace 3000 Quick Start Guide Version 1.1

This guide provides basic instruction on the setup of
MACE HydroMace 3000 instruments.

AgriFlo Series 3 Quick Start Guide Version 3.0

This guide provides basic instruction on the setup of
MACE AgriFlo Series3 instruments.

FloPro Series 3 Quick Start Guide Version 1.2

This guide provides basic instruction on the setup of
MACE FloPro Series3 instruments.